S717 E A/B/CSpecial Electrodes for Alloy Steel
High-Manganese Steel Electrode for Pre-Hardfacing Rebuild
Covered Electrode
An electrode for repairing and rebuilding components before hardsurfacing, such as railway track, mill hammers, rollers, and crushers, thanks to its high manganese steel content. Can also be used to weld between cast iron and steel. Resists cracking, abrasion, impact, corrosion, pressure, cavitation, and extreme shock — the weld deposit work-hardens further in service. AISI grades: 420, 430, 430T, 431, 440, 502, 405, 410.
S363 E A/BStainless Steel Electrodes
CrNi / Manganese Steel Stainless Electrode
Covered Electrode
A stainless steel electrode alloyed with Cr and manganese steel, highly flexible for welding and joining dissimilar metals such as stainless steel, manganese steel, tool steel, carbon steel, mild steel, and high-alloy steel. Used to repair sprockets and wheel shafts, and suited as a buffer layer before hardsurfacing. Weld metal resists corrosion and cracking. Material grades: G-X 7 Cr 13, G-X 20 Cr 14, G-X 10 Cr Mo 13, G-X 8, Cr Ni 13, 403, 405, 410, 420, 430, 430 Ti, 431, 446, 312.
S390 EStainless Steel Electrodes
CrMo Stainless Steel Electrode, Seawater & Heat Resistant
Covered Electrode
A CrMo alloy stainless steel electrode with good weldability, usable in all positions except vertical-down. Mainly used on hard surfaces resistant to corrosion, wear, and seawater, and heat resistant up to 900°C. Recommended material grades: GS-C 25, X22CrNi 17, 41 Cr 4, 430, 430 Mo.
S515 EElectrodes for Abrasion, Impact, Heat & Pressure Resistance
Hardfacing Electrode for Heat, Abrasion & Corrosion
Covered Electrode
A hardfacing electrode for hard surfaces subject to pressure, impact, abrasion, corrosion, erosion, metal-to-metal friction, and heat up to 900°C. Used for valve shutters and caps, wood-working tools, saw chains and slideways, hot shear blades, pump components, hot pressing tools, valve seats, ingot tong ends, and conveyor screws. Also used in the chemical and food industries.
S525 EElectrodes for Abrasion, Impact, Heat & Pressure Resistance
Hardfacing Electrode for Cutting Tools
Covered Electrode
A hardfacing electrode resistant to pressure, abrasion, corrosion, erosion, cavitation, and heat up to 900°C (briefly to 1000°C). Used for cutting blades/cutters in the wood, paper, and plastic-cutting industries. Also resistant to metal-to-metal friction and wear in drilling tools.
S535 EElectrodes for Abrasion, Impact, Heat & Pressure Resistance
Hardfacing Electrode for Steel Mill Wear Parts
Covered Electrode
A hardfacing electrode resistant to impact, pressure, corrosion, and severe friction, with heat resistance sometimes up to 1100°C and resistance to metal-to-metal friction. Recommended for welding cutting tools, screw conveyors, valves, milling and mixing equipment, drilling tools, wear rings, and guide rails or rollers in steel mills.
S5156 EElectrodes for Abrasion, Impact, Heat & Pressure Resistance
Overlay Electrode for Worn Tool Steel
Covered Electrode
An electrode for overlaying worn steel, especially tool steel, resistant to high heat, abrasion, and pressure — suited for hot cutting blades, hammers, grinders, forming molds, casting molds, and cylinder surfaces.
S5158 EElectrodes for Abrasion, Impact, Heat & Pressure Resistance
High Speed Steel Hardfacing Electrode
Covered Electrode
An overlay electrode for high-speed steel and cutting-tool edges made of alloy steel, highly resistant to friction, wear, pressure, and impact — suited for high-carbon steel and tool steel such as exhauster fan blades, cutting dies, cutting edges, and crushers.
S555 E AElectrodes for Abrasion, Impact, Heat & Pressure Resistance
Hardfacing Electrode for Mining Impact & Abrasion
Covered Electrode
A hardfacing electrode with good impact and pressure strength, abrasion resistant. Suited for the final overlay pass on equipment exposed to heavy impact and pressure — mineral mining machines, impact drilling and crushing devices, guide springs, cutting tool edges, hard manganese steel, and bucket edges and teeth.
S555 E BElectrodes for Abrasion, Impact, Heat & Pressure Resistance
Silicon-Chromium Hardfacing Electrode (MIG)
MIG Hardfacing Wire
A silicon-chromium alloy hardfacing electrode, extremely hard, crack resistant, tough, and impact resistant. For the best weld quality, buffer layering with Starlet 595 E.B, Starlet 696 E.B, Starlet 717 E, or Starlet 363 E.A is recommended to achieve maximum strength. Used for hardfacing parts of earth and mineral mining machines, impact drilling and crushing devices, guide springs, cutting tool edges, hard manganese steel, bucket edges and teeth, and alloy steel.
S555 E CElectrodes for Abrasion, Impact, Heat & Pressure Resistance
Final-Layer Hardfacing Wire for Mining Machinery (MIG)
MIG Hardfacing Wire
An electrode for final-layer welding on mining machinery such as drilling and crushing devices, guide springs, cutting tool edges, hard manganese steels, and bucket edges and teeth. The weld metal is crack resistant and tough.
S555 E DElectrodes for Abrasion, Impact, Heat & Pressure Resistance
Hardfacing Wire for Mining & Agricultural Abrasion (MIG)
MIG Hardfacing Wire
A hardfacing electrode for surfaces exposed to abrasion combined with heavy impact, such as in the mining and agricultural industries. The weld result cannot be machined.
S555 E FElectrodes for Abrasion, Impact, Heat & Pressure Resistance
Universal Hardfacing Wire for Alloy & Manganese Steel (MIG)
MIG Hardfacing Wire
A universal hardfacing electrode used for alloy steel, cast steel, and hard manganese steel. Resistant to a combination of impact, compression, and abrasion — such as on shafts, gliding surfaces, gears, plough shares, rails, shunts, crossings, baffle plates, and excavator parts.
S595 E A/BElectrodes for Abrasion, Impact, Heat & Pressure Resistance
Light Abrasion & Impact Hardfacing Wire (MIG)
MIG Hardfacing Wire
An electrode resistant to abrasion and light impact, used for conveyor screws, mixer blades, and sand pumps. Also suitable as a final layer for high-manganese steel material.
S5353 E A/BElectrodes for Abrasion, Impact, Heat & Pressure Resistance
Hardfacing Electrode for Molds, Rollers & Crusher Jaws (MIG)
MIG Hardfacing Wire
A hardfacing electrode resistant to impact and high abrasion, used to overlay steel surfaces requiring maximum hardness such as molds, rollers, crusher jaws, and shear blades. Also resistant to shock and high pressure, and highly crack resistant. Can be used on all alloy steel types, high-manganese steel, and carbon steel.
S3050 ETHardfacing Tubular Electrodes
Nickel-Enriched Manganese Steel Tubular Electrode
Tubular Hardfacing Electrode
A tubular hardfacing electrode for high-manganese steel with added nickel, resistant to metal-to-metal friction, impact, shock, and pressure. Can also be used for an initial welding layer before hardfacing — the weld deposit work-hardens further in service.
S1864 ETHardfacing Tubular Electrodes
Chromium-Molybdenum-Niobium Tubular Electrode, 400°C
Tubular Hardfacing Electrode
A tubular hardfacing electrode alloyed with chromium, molybdenum, and niobium in a steel-tube matrix. This combination makes it resistant to temperatures up to 400°C, moderate abrasion, and impact.
S407 TTIG, Brazing and Gas
Hardfacing TIG/MAG Wire for Forging Dies
TIG / MAG Hardfacing Wire
A TIG hardfacing wire used to overlay and build up tools exposed to impact, pressure, abrasion, and hot-work tool steel — such as forging dies/molds, hammers, v-beds, cast steel, and casting rolls. High wear resistance and toughness at high temperature.
S717 TTIG, Brazing and Gas
High-Manganese TIG/MIG Wire for Pre-Hardsurfacing Rebuild
TIG / MIG Wire
A TIG wire for repairing and rebuilding components before hardsurfacing, such as railway track, mill hammers, rollers, and crushers, due to its high manganese steel content. Can also be used to weld between iron and steel. Resistant to impact, corrosion, pressure, cavitation, and extreme shock. The weld deposit hardens further after use. (307, 307L)
S2005Metal Spraying Powder
Flexible Nickel Spray Powder
Metal Spraying Powder
A very flexible nickel-based powder, used to overlay various equipment exposed to impact, friction, abrasion, and corrosion.
S2007Metal Spraying Powder
Nickel-Silicon Wear-Resistant Spray Powder
Metal Spraying Powder
A nickel and silicon powder resistant to wear and metal-to-metal pressure, and machinable.
S2010Metal Spraying Powder
Cobalt Alloy Spray Powder for High Heat & Impact
Metal Spraying Powder
A nickel-cobalt alloy powder very resistant to heat, abrasion, impact, and corrosion. Used for valve shutters and caps, wood-working tools, saw chains and slideways, hot shear blades, pump components, hot pressing tools, valve seats, ingot tong ends, conveyor screws, paper/cardboard cutting tools, floor-covering roofing, cutter tools, and guide rails. Also suitable for the food and chemical industries.